Unlock wireless connectivity with our industrial wireless access points. Our solutions provide reliable and secure wireless networking for various industrial applications, especially in challenging environments like factories, warehouses, and outdoor locations that require ruggedized design.
IAP-420 is reliable 802.11 b/g/n WLAN Access Point with 2 ports LAN. It supports 802.1X and MAC filters for security control. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. You are able to configure IAP-420 by web interface via LAN port or WLAN interface. IAP-420 is one of the best communication solutions for wireless applications on the industrial network.
Physical ports | |
---|---|
10/100Base-T(X) ports in RJ45 | 2 |
LED Indicators | |
---|---|
WIFI(WLAN) Indicator | WLAN Link /ACT: Green: Blinking |
Power indicator | LED x 3, PWR 1, 2, (PoE): Green On: Power is on and functioning Normally. |
10/100Base-T(X) RJ45 Port Indicator | LED x 2 , Green for port Link/Act at 100Mbps. |
Power | |
---|---|
Power consumption (Typ.) | 4watts |
Redundant Input power | Dual DC inputs. 12~48VDC on 4-pin terminal block |
Overload current protection | Present |
Reverse polarity protection | Present |
WLAN Interface | |
---|---|
Operating Mode | AP/Bridge/AP-Client |
Antenna Connector | 1 x External reverse SMA-type antenna connector |
Modulation | IEEE802.11b: CCK, DQPSK, DBPSK IEEE802.11g/n: OFDM with BPSK, QPSK, 16QAM, 64QAM |
Frequency Band | America / FCC: 2.412~2.462 GHz (11 channels ) Europe CE / ETSI: 2.412~2.472 GHz ( 13 channels ) |
Transmission Rate | 802.11b: 1/2/5.5/11 Mbps 802.11g: 6/9/12/18/24/36/48/54 Mbps 802.11n(40MHz): UP to 150 Mbps |
Transmit Power | 802.11b: 13.5dBm ± 1.5dBm 802.11g: 13.5dBm ± 1.5dBm 802.11n(2.4G@20MHz): 13.5dBm ± 1.5dBm 802.11n(2.4G@40MHz): 13.5dBm ± 1.5dBm |
Receiver Sensitivity | 802.11b: -90dBm ± 2dBm@1Mbps 802.11g: -72dBm ± 2dBm@54Mbps 802.11n(2.4G@40MHz,MCS7): -68dBm ± 2dBm |
Encryption Security | WEP: (64-bit, 128-bit key supported) WPA/WPA2:802.11i (WEP and AES encryption) WPA-PSK (256-bit key pre-shared key supported) 802.1X Authentication supported TKIP encryption |
Protocol Support | |
---|---|
Protocol | ARP,BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, 802.1X, SNMP, STP |
Physical Characteristic | |
---|---|
Enclosure | IP-30 |
Dimensions (mm) | 41(W)x81(D)x95(H) |
Weight (g) | 292 |
Environmental | |
---|---|
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Operating Temperature | -10 to 60°C (14 to 140°F) |
Operating Humidity | 5% to 95% Non-condensing |
Warranty | |
---|---|
Warranty | 3 years |
Downloads |
|
---|
Regulatory Approvals | ||
---|---|---|
EMI | FCC Part 15, CISPR (EN55022) class A | |
EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 | |
Shock | IEC60068-2-27 | |
Free Fall | IEC60068-2-32 | |
Vibration | IEC60068-2-6 | |
Safety | EN60950-1 |
Dimensions | ![]() |
---|