Unlock wireless connectivity with our industrial wireless access points. Our solutions provide reliable and secure wireless networking for various industrial applications, especially in challenging environments like factories, warehouses, and outdoor locations that require ruggedized design.
IGAP-610H+
Industrial WIFI4 Wireless AP with 1GE, PoE P.D
Description
IGAP-610H+ is a reliable WLAN Access Point with 1 Ethernet Gigabit ports and IEEE 802.11 a/b/g/n wireless module. It can be configured to operate in AP/Client/Repeater Mode. You are able to configure IGAP-610H+ by WEB interface via LAN port or WLAN interface. In addition, IGAP-610H+ also provides P.D. feature on Ethernet port which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IGAP-610H+ is one of the best communication solutions for wireless applications on the industrial network.
Features
- High Speed Air Connectivity: Dual Band in IEEE 802.11 a/b/g/n and b/g/n WLAN interface selectable and support up to 300Mbps link speed
- 12~48VDC power input on terminal block
- 1 Gigabit Ethernet ports with 2KV isolation for PoE P.D.
- Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
- Support X-Roaming < 100 ms
- Support Multiple-SSID to 4 SSID with VLAN
- Support MAC Filter
- High transmission power (27 dBm Max.)
- High data throughputwith HT40 2x2 MIMO
- Support Long Distance Air Connectivity
- Support AP/Client/Repeater
- Wireless connecting status monitoring
- Secured Management by HTTPS
- Event Warning by Syslog, Email, SNMP Trap, and Relay output
- Rigid IP-30 housing design
- DIN-Rail and Wall-mount enabled
Physical ports | |
|---|---|
| 10/100/1000Base-T(X) ports in RJ45 | 1 |
| PoE P.D. Port | Present at ETH1 Fully compliant with IEEE 802.3af Power Device specification Over load & short circuit protection Isolation Voltage: 2000 VDC min. Isolation Resistance : 10⁸ ohms min |
LED Indicators | |
|---|---|
| WIFI(WLAN) Indicator | 3 x LEDs signal quality 75%, 50% 25% 1 x Green for WLAN Link /Act |
| Power indicator | 3 x LEDs, P1, P2, PoE: Green On : Power is on and functioning Normal |
| System Indicator (Status) | 1 x LED, Blink for system booting, Solid for system ready. |
| 10/100/1000Base-T(X) RJ45 port indicator | 2 x LEDs, LNK/ACT:Green for port Act. Speed: Green for port Link at 1000Mbps Amber for port Link at 100Mbps. Off for port Link at 10Mbps |
Power | |
|---|---|
| Power consumption (Typ.) | 7W |
| Redundant Input power | Dual DC inputs. 12~48VDC on 4-pin terminal block |
| Overload current protection | Present |
| Reverse polarity protection | Present on the terminal block |
WLAN Interface | |
|---|---|
| Operating Mode | AP/Client/Repeater |
| Antenna Connector | Reverse SMA Female |
| Modulation | IEEE802.11a: OFDM IEEE802.11b: CCK/DQPSK/DBPSK IEEE802.11g: OFDM IEEE802.11n: BPSK, QPSK, 16-QAM, 64-QAM |
| Frequency Band | America/FCC: 2.412~2.462 GHz (11 channels) 5.180~5.240 GHz & 5.745~5.825 GHz ( 9 channels ) Europe CE/ETSI: 2.412~2.472 GHz (13 channels) 5.180~5.240 GHz ( 4 channels ) |
| Transmission Rate | 802.11b: 11, 5.5, 2, 1 Mbps; 802.11a/g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n: up to 300Mbps |
| Transmit Power | 802.11a: 23dBm ± 1.5dBm@6Mbps, 21dBm ± 1.5dBm@54Mbps 802.11b: 23dBm ± 1.5dBm@1Mbps, 23dBm ± 1.5dBm@11Mbps 802.11g: 23dBm ± 1.5dBm@6Mbps, 21dBm ± 1.5dBm@54Mbps 802.11gn HT20: 20dBm ± 1.5dBm@MCS7, 802.11gn HT40: 20dBm ± 1.5dBm @MCS7 802.11an HT20: 20dBm ± 1.5dBm@MCS7, 802.11an HT40: 20dBm ± 1.5dBm @MCS7 |
| Receiver Sensitivity | 802.11a : -93dBm ± 2dBm@6Mbps, -74dBm ± 2dBm@54Mbps 802.11b : -98dBm ± 2dBm@1Mbps, -90dBm ± 2dBm@11Mbps 802.11g : -90dBm ± 2dBm@6Mbps, -77dBm ± 2dBm@54Mbps 802.11gn HT20:-74dBm ± 2dBm@MCS7, 802.11gn HT40:-71dBm ± 2dBm@MCS7 802.11an HT20:-71dBm ± 2dBm@MCS7, 802.11an HT40:-68dBm ± 2dBm@MCS7 |
| Encryption Security | WEP: (64-bit ,128-bit key) WPA/WPA2 PSK :TKIP and AES encryption (802.11i) 802.1X/RADIUS Authentication supported |
Protocol Support | |
|---|---|
| Protocol | ARP, BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, STP, RSTP |
Physical Characteristic | |
|---|---|
| Enclosure | IP-30 |
| Dimensions (mm) | 45 (W) x 95 (D) x 115 (H) |
| Weight (g) | 375 |
Environmental | |
|---|---|
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operating Temperature | -10 to 70°C (14 to 158°F) |
| Operating Humidity | 5% to 95% Non-condensing |
Warranty | |
|---|---|
| Warranty | 5 years |
Downloads |
| ||||
|---|---|---|---|---|---|
Regulatory Approvals | ||
|---|---|---|
| EMC | CE EMC (EN 55024, EN 55032), FCC Part 15B | |
| EMI | EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15B class A | |
| EMS | EN 55024 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS), IEC/EN 61000-4-4 (EFT), IEC/EN 61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN61000-4-8(PFMF), IEC/EN 61000-4-11(DIP)) | |
| Shock | IEC60068-2-27 | |
| Free Fall | IEC60068-2-31 | |
| Vibration | IEC60068-2-6 | |
| Safety | EN60950-1 | |
| MTBF | 211477 hrs | |
Dimensions |  |
|---|