ad banner 1122Unlock wireless connectivity with our industrial wireless access points. Our solutions provide reliable and secure wireless networking for various industrial applications, especially in challenging environments like factories, warehouses, and outdoor locations that require ruggedized design.

TDGAP-830D+-M12X-WV

TDGAP-830D+-M12X-WV

Industrial EN50155 WIFI5 Access Point with 3x10/100/1000Base-T(X), M12 Connector

-25_70c.pngen50155.pngfull_gigabit.pngpoe_pd.png

Description

ORing’s TransporterTM series access point is designed for industrial and rolling stock wireless applications, such as vehicle, and railway applications. TDGAP-820D+-M12X-WV is a reliable WIFI5 WLAN Access Point with 3 Ethernet 10/100/1000 ports. It can be configured to operate in AP/Client Mode. TDGAP-820D+-M12X-WV provide a dust-tight connection and reverses SMA-type connectors that can install any reverse SMA-type antennas to extend communication distance. It is specifically designed for the toughest industrial environments. You are able to configure TDGAP-820D+-M12X-WV by WEB interface via LAN port or WLAN interface. TDGAP-820D+-M12X-WV can be easily adopted in almost all kinds of applications and provides the most rugged solutions for managing your network in outdoor. In addition, TDGAP-820D+-M12X-WV also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3at PoE P.D. specification. Therefore, TDGAP-820D+-M12X-WV is one of the best communication solutions for wireless applications.

Features

  • Leading EN50155-compliant wireless access point for rolling stock application
  • High Speed Air Connectivity: WIFI5 interface support up to 867
  • Mbps link speed and WIFI6 up to 1733Mbps link speed
  • Highly Security Capability: WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
  • Support external SMA antenna installation
  • Support AP/Client Mode
  • Support Multiple-SSID to 4 SSID
  • Support MAC Filter
  • Wireless connecting status monitoring
  • Secured Management by HTTPS
  • 1KV isolation for PoE P.D. port
  • Event Warning by Syslog, Email, SNMP Trap, and Relay output
  • Rigid IP-40 housing design
  • Wall mounting enabled

Physical ports

10/100/1000Base-T(X) ports in M123(LAN)

LED Indicators

Ethernet Port Indicator6 x LEDs,
LNK: Green for port Link/AcT.
SPD: Green On for 1000/100Base-T(X) link; Green Off for 10Base link
WIFI(WLAN) Indicator3 x LEDs,
1 x LED, Green On: RF on, Blink: data transmitting
1 x LED, Green for WLAN work on 2.4GHz
1 x LED, Green for WLAN work on 5GHz
SIM Indicator1 x LED, Green slow blink for normal, off for system halt
Power indicator1 x LED, Green for DC Power in
PoE Indicator1 x LED, Green for POE Power in

Power

IsolationDC 2KV/ AC 1.5KV
Power consumption (Typ.)25 watts Max.
Power Input24 ~ 110Vdc
Overload current protectionPresent
Reverse polarity protectionPresent

Antenna Connector

WIFI2 x RP-SMA female

WLAN Interface

ModulationIEEE 802.11a: OFDM
IEEE 802.11b: CCK, DQPSK, DBPSK
IEEE 802.11g: OFDM
IEEE 802.11n: BPSK, QPSK, 16-QAM, 64-QAM
IEEE 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Frequency BandAmerica / FCC:
2.412~2.462 GHz
5.180~5.240 GHz & 5.745~5.825 GHz
Europe CE / ETSI:
2.412~2.472 GHz
5.180~5.240 GHz
Transmission RateIEEE 802.11b: 1/2/5.5/11 Mbps
IEEE 802.11a/g: 6/9/12/18/24/36/48/54 Mbps
IEEE 802.11n: UP to 300 Mbps
IEEE 802.11ac: up to 867Mbps
Transmit PowerIEEE 802.11a: 12dBm ± 2dBm@54Mbps
IEEE 802.11b: 18dBm ± 2dBm@11Mbps
IEEE 802.11g: 15dBm ± 2dBm@54Mbps
IEEE 802.11gn HT20: 14dBm ± 2dBm @MCS7
IEEE 802.11gn HT40: 14dBm ± 2dBm @MCS7
IEEE 802.11an HT20: 11dBm ± 2dBm @MCS7
IEEE 802.11an HT40: 10dBm ± 2dBm @MCS7
IEEE 802.11ac VHT80: 7dBm ± 2dBm @MCS9
Receiver SensitivityIEEE 802.11a : -71dBm ± 2dBm@54Mbps
IEEE 802.11b : -86dBm ± 2dBm@11Mbps
IEEE 802.11g : -72dBm ± 2dBm@54Mbps
IEEE 802.11gn HT20:-68dBm ± 2dBm@MCS7
IEEE 802.11gn HT40:-66dBm ± 2dBm@MCS7
IEEE 802.11an HT20:-68dBm ± 2dBm@MCS7
IEEE 802.11an HT40:-67dBm ± 2dBm@MCS7
IEEE 802.11ac VHT80:-57dBm ± 2dBm@MCS9
Encryption SecurityWEP: (64-bit ,128-bit key supported)
WPA/WPA2 :802.11i(WEP and AES encryption)
WPA-PSK (256-bit key pre-shared key supported)
802.1X Authentication supported
TKIP encryption

Protocol Support

ProtocolARP,BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, STP, RSTP

Physical Characteristic

EnclosureIP-30. (IP-40 for front face)
Dimensions (mm)200(W) x 100(D) x 89(H)
Weight (g)1170

Environmental

Storage Temperature-40 to 85°C (-40 to 185°F)
Operating Temperature-25 to 70°C (-13 to 158°F)
Operating Humidity5% to 95% Non-condensing

Warranty

Warranty5 years

Downloads

DatasheetVersionChecksumRelease DateRelease NoteSize
TDGAP-830D+-M12X-WV series DatasheetFebruary 19, 2025392.89 kB

QIGVersionChecksumRelease DateRelease NoteSize
TDGAP-830D+-M12X-WV Quick Installation GuideJuly 15, 20253.46 MB

User ManualVersionChecksumRelease DateRelease NoteSize
TDGAP-830D+-M12X-WV User ManualJuly 15, 20251.97 MB

FirmwareVersionChecksumRelease DateRelease NoteSize
TDGAP-830D+-M12X-WV FirmwareJuly 15, 202518.62 MB

Regulatory Approvals

Rail TrafficEN50155
EMIFCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMSEN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
ShockIEC60068-2-27, EN61373
Free FallIEC60068-2-31
VibrationIEC60068-2-6, EN61373
SafetyEN60950-1

Dimensions